Duofiller Mono G3

The Duofiller Mono (G3) is a can and bottle filler that quickly and accurately fills cans or bottles to the preset fill level with minimal spillage or waste. Duofiller Mono is the single-head version of the Duofiller.

Key Features:
• Fill rate: approximately 1 liter per minute (at 1 bar keg pressure)
• Consistent fill level every time
• Stainless steel inlet connectors
• Minimal waste
• Fills both cans and bottles
• Easy to clean
• WiFi connection for settings

Usage
Duofiller Mono (G3) pre-purges the can/bottle with CO2 before it fills to the desired fill level. The fill level is easily programmed by entering programming mode, start a fill, and then manually stop at the desired fill level with a single button press. Subsequent fills will automatically stop at the set fill level.
Cleaning

Cleaning is as easy as filling! Simply connect to a keg with water, line cleaner, sanitizer, etc., and run a filling cycle to clean the machine. Duofiller Mono (G3) uses a pinch valve that flattens a soft tube to shut off the flow, ensuring no cavities or narrow passages where particles can get stuck or are difficult to clean.

If used for mixed fermentation and disinfection is required, all parts in contact with the beverage can be easily disassembled and boiled in water in a kettle.
Design

Duofiller Mono (G3) is designed to be wall-mounted to save tabletop space. It comes with screws for direct wall mounting. For example, it can be hung over a sink or a tray for easy spill management.

It has a dedicated button to start the fill. There are no small screens or tiny buttons to struggle with; programming the fill level is simple using the same button. For additional/advanced settings, it has a web interface accessible from a standard web browser. The web interface is hosted locally on the machine. Local hosting ensures independence from internet or cloud services and eliminates risks of vulnerabilities, downtimes, or service discontinuations common to cloud-based solutions.

Included
• Beverage line 2.5m 3/16" OD John Guest type filling line for normally carbonated beverages
• 3/16" OD filling line with a slightly smaller inner diameter for highly carbonated beverages
• 110V-240V AC to 12V DC power supply with EU plug

Requirements
• If connecting to Cornelius kegs, you'll need a 1/4" MFL threaded liquid disconnect (8929 or 890247).
• For connecting to unitanks, we recommend a tri-clamp adapter (878530 + 878530).
• CO2 hose and regulator. The CO2 pressure for the machine should be max 0.2 bar (3psi), meaning it's best to have a regulator with a dedicated outlet. If CO2 is taken from the same outlet as the keg, a secondary regulator (inline regulator) can be used to provide 0.2 bar (3psi).
• Pressurized container/keg/unitank. The keg pressure must be min 0.5 bar/max 1.4 bar (7-20psi).