Chugger Max TRI-TCPSSMAX-CI (Center, Stainless)

Chugger Max is the largest pump from Chugger. It is made from food grade stainless steel and can withstand temperatures up to 120 ° C. The magnetic drive makes the pump completely leak-proof. The pump is not self-priming and must therefore be placed low in the system so that it fills with fluid.

The motor on this pump is TEFC (Totally Enclosed Fan Cooled) and thereby protected against splashes.

Please note: The motor is preset for 115 V. For usage in Europe this must be changed for 230 V before first use. This is done via an easily accessible switch under the motor cover. Delivered without a plug and should be installed by a qualified electrician.

NOTE: The inlet must not be throttled to less than 3/4 "= 19 mm!
If you want to limit the flow with, for example, a ball valve, this should be done at the outlet, not at the inlet.


General Specification
Model: TRI-TCPSSMAX-CI

1,5" TC inlet and outlet
Minimum ID Inlet 3/4"

316 STAINLESS STEEL (Front Housing), 316 Stainless Steel (Rear Housing), Teflon (Thrust Washer), CLEAR Silicone (O-Ring), Ryton/Teflon Impeller

Max Flow: 17 GPM (64,3 LPM)
Max Head: 27 FT (8,3 M)
Max Temp: 250F (120C)
Power: 1/8 HP (.125 HP) (93W)
Electrical: 115 & 230V
Hz: 50/60
RPM: 3500
TEFC (Totally Enclosed Fan Cooled) Motor

Motor AMP Rating - Full Load Amps (FLA)
Motor Only: 1.4 Amps
Motor and Pump: 2.0 Amps

Materials are FDA Food Compliant
Components are UL Recognized
Chugger Max contains sealed bearings. No oil necessary.