0
Your cart
Lindr Pygmy 20/K (1 tap + compressor)
Lindr Pygmy 20/K (1 tap + compressor)
Lindr Pygmy 20/K (1 tap + compressor) - 2
Lindr Pygmy 20/K (1 tap + compressor) - 3

Lindr Pygmy 20/K (1 tap + compressor)

5.0
Add to list of favorites
Read more...

Description

Article no.: 892038

Lindr Pygmy 20/K Green Line New is a compact and portable air cooled draft beer cooler for home or professional use, for example at trade shows, festivals and celebrations.

This cooler has a momentary capacity of up to 25 liters per hour, and 20 - 25 liters per hour in continuous operation. The modern compressor cooler is very energy efficient.

The compressor can also be used for dispensing beer. Used with a conventional keg, the beer should be consumed within a day, but with "Bag-in-Keg"-kegs such KeyKeg this is not a problem as the air does not come into contact with the beer. Of course, you may also use CO2 instead.

Ready to dispense perfectly chilled beer within 2 - 4 minutes after the cooler has been switched on.

The materials used meet the highest requirements for hygiene standards guarantee a long working life. Exterior in stainless steel for a clean and aesthetic appearance.

Lindr Green Line uses an environmentally frindly refrigerant (R290) and has 20 % higher cooling power along with 20 % lower energy consumption. These coolers are made from 100 % recyclable materials.

The (retractable) lifting handle makes it easy to move and carry the unit.

Supplied with flow control faucet, tap handle and a stainless steel drip tray.

Beer connections: 3/8" JG quick fittings.
Air connection: 5/16" (8 mm) JG quick fitting.

The temperature can be adjusted to 7 different settings.

In stock: 3


  • Fast delivery
  • International shipping
  • E-mail us, we reply swiftly!
  • BrandLindr

Description

Article no.: 892038

Lindr Pygmy 20/K Green Line New is a compact and portable air cooled draft beer cooler for home or professional use, for example at trade shows, festivals and celebrations.

This cooler has a momentary capacity of up to 25 liters per hour, and 20 - 25 liters per hour in continuous operation. The modern compressor cooler is very energy efficient.

The compressor can also be used for dispensing beer. Used with a conventional keg, the beer should be consumed within a day, but with "Bag-in-Keg"-kegs such KeyKeg this is not a problem as the air does not come into contact with the beer. Of course, you may also use CO2 instead.

Ready to dispense perfectly chilled beer within 2 - 4 minutes after the cooler has been switched on.

The materials used meet the highest requirements for hygiene standards guarantee a long working life. Exterior in stainless steel for a clean and aesthetic appearance.

Lindr Green Line uses an environmentally frindly refrigerant (R290) and has 20 % higher cooling power along with 20 % lower energy consumption. These coolers are made from 100 % recyclable materials.

The (retractable) lifting handle makes it easy to move and carry the unit.

Supplied with flow control faucet, tap handle and a stainless steel drip tray.

Beer connections: 3/8" JG quick fittings.
Air connection: 5/16" (8 mm) JG quick fitting.

The temperature can be adjusted to 7 different settings.

Recensioner

5.0
Baserat på 1 betyg1 betyg
5
4
3
2
1
Recensioner (1)
Recensioner (1)
Powered by TestFreaks
Kalle E

Frågor och svar

Ställ en fråga
Frågor och svar (2)
Ställ en fråga
Frågor och svar (2)
Powered by TestFreaks
Orest
Gänga till tappkranen

Vad är det för gänga till tappkranen i en Lindr Pygmy 20/K Green Line? Är det 5/8" -35mm eller 1-1/8"-18 UNEF eller någon annan?

Kundtjänst

Hej,

Det är 35mm / 5/8".

Med vänlig hälsning, Rebecca

Magnus
Kopla Corneliusfat till Lindr pygmy 25K

Hej, Fick en Lindr pygmy 25 K i present med alla kopplingar till förutom till Corneliusfat. Vilket jag använder. Min fråga är vad behöver jag för kopplingar för att kunna koppla in Corneliusfat till Lindr? Har sökt på nätet men hittar inget.

Magnus

Kundtjänst

Hej

Om du använder corneliusfat behöver du några meter 3/8" PE-slang (art.nr. 8737), en JG 3/8" - 1/4" FFL (art.nr. 879014), och en gängad kulkoppling för öl (art.nr. 8929). Slangen passar direkt i Lindr-kylarens ölanslutning.

Mvh Alexander

Files and media

Product sheet
Manual